Image quality low - Can't install Intel Graphic card drivers

October 13, 2017, 8:31 am

≫ Next: HP Pavilion x360 13-u131tu has a small port on left side just upon volume rocker what is it

≪ Previous: Pavilion x360 15-bk163dx stylus compatability

Hi I'm italian so I will try to explain my situation the best I can.

I've bought a Omen 17-w102nl model and I've immediatly notice a noise in the image like very soft but it's in there, and even a low sharpness.

So I begun to change different level of sharpness and noise reduction on the Nvidia controll panel and yes there was an improvment after but the quality remain very poor and artifacts appear on the screen with a high level of sharpness.

So Iv'e reach the device manager> Graphic Card but there was only the gtx 1070 and then I've speak with a guy of Nvidia and he said I needed to uninstall the Nvidia drivers with display driver uninstaller for incompatibility issues and then install first the Intel driver on this page https://support.hp.com/it-it/drivers/selfservice/omen-by-hp-17-w100-laptop-pc/12499486/model/13191000?sku=Y5T67EA

and then the Nvidia 22.21.13.8205 driver. I've tried to install the intel driver after using DDU but this message pop up after the installation bar reach the end "This computer does not meet the minimum requirements for installing the softwar"

So now I have updated again the Nvidia drivers and tried again to install the intell drivers but the same message keeps poping up blocking the installation, so what can I do to fix this?

↧

HP Pavilion x360 13-u131tu has a small port on left side just upon volume rocker what is it

October 13, 2017, 8:43 am

≫ Next: Built-in webcam not found

≪ Previous: Image quality low - Can't install Intel Graphic card drivers

HP Pavilion x360 - u131tu has usb C port or not

↧

Built-in webcam not found

October 13, 2017, 11:03 am

≫ Next: "HW encode" error message in CyberLink Youcam

≪ Previous: HP Pavilion x360 13-u131tu has a small port on left side just upon volume rocker what is it

I am having trouble with my built-in webcam. I have never used it before, and I'm not even sure I've ever checked to see that it worked.

When I try to use the Windows 10 Camera app, I get there error code 0xA00F4244(0xC00DABED).

The camera is not listed in Device Manager under either Imaging Devices or Sound, video and game controllers.

I installed HP's sp71830, the YouCam 6.0 software. I then see the CyberLink WebCam Virtual Driver 6.0 under Sound, video and game controllers. But the camera is still not located by any app that might need it.

Any help is appreciated.

↧

"HW encode" error message in CyberLink Youcam

October 13, 2017, 11:15 am

≫ Next: Maximum resolution

≪ Previous: Built-in webcam not found

Everytime I try to record a video, it takes about 15 seconds to display the error message. It happens everytime and cant find a solution so far.

Would be glad to hear your recommendations

↧

Maximum resolution

October 13, 2017, 12:36 pm

≫ Next: How do I prevent Words With Friends from filling the whole screen so I cannot see the back arrow?

≪ Previous: "HW encode" error message in CyberLink Youcam

Hello.
I connected the monitor to the laptop. I want to set the resolution to 2560 * 1080, but I can not get a resolution larger than 1920 * 1080. The nvidia gerforce 830m features say that the maximum supported resolution is 2560x1600. I'm using a wire hdmi to hdmi. I updated the driver. What should I do?
Thank you.

↧

How do I prevent Words With Friends from filling the whole screen so I cannot see the back arrow?

October 13, 2017, 12:59 pm

≫ Next: Broken Screen

≪ Previous: Maximum resolution

Problem with Words With Friends on HP phone.

↧

Broken Screen

October 13, 2017, 2:20 pm

≫ Next: is my laptop

≪ Previous: How do I prevent Words With Friends from filling the whole screen so I cannot see the back arrow?

Today, I opened up my laptop only to see a white screen streaked with thick black and grey lines in no geometrical assortment. I was just wondering... Is there any easy way possible to return my laptop to normal? Or is it a goner?

↧

is my laptop

October 13, 2017, 2:28 pm

≫ Next: Can't project HDMI video/audio from ROKU 3600

≪ Previous: Broken Screen

is this laptop HDTV capabile Y5X39UA#ABA

↧

Can't project HDMI video/audio from ROKU 3600

October 13, 2017, 6:51 pm

≫ Next: 2 monitors on my HP Envy x360

≪ Previous: is my laptop

Want to record Comcast saved TV program from DVR to notebook using Windows 10 game bar. Connected ROKU 3600 via hdmi but couldn't project TV onto notebook using every display option (F4 key). Searched wireless networks, selected ROKU device, but was unable to get ROKU to connect. (ROKU accesses Comcast DVR via Xfinity Beta app.) Why won't TV project on notebook using ROKU? Or, how can I record from DVR to notebook using another means? Am using wireless connection to desktop. Plex works just fine so know the connection is good.

↧

2 monitors on my HP Envy x360

October 13, 2017, 7:51 pm

≫ Next: Display or internal system

≪ Previous: Can't project HDMI video/audio from ROKU 3600

Cam I have 2 monitors on my HP Envy x360. I have 2 monitors that are cha so I bought 2 cha to hdmi then connect that to am hdmi splitter. When I plug in the final connector (hdmi splitter) nothing happens, my monitors say "no signal but if I pull one cha to hdmi out one screen comes on. I checked both hdmi slots to make sure it was not the device and it is not. Tech support said my device will not support 2 monitors because it is tablet convertible. Do I have to purchase a new computer to have 2 monitors or is there a way to make this work

↧

Display or internal system

October 13, 2017, 9:16 pm

≫ Next: Graphics card problem

≪ Previous: 2 monitors on my HP Envy x360

I have a problem with my laptop HP Pavilion, I do not know if it is the display or the internal system of it.

When I open the laptop, there are purple and green lines on the scren and suddenly they disappear and I don't know what could have caused the problem.

I am very worried to be honest because the warranty experied just yesterday (October 12th, 2017) and today a friend of mine told that maybe I could still have the warranty available which I did not, so I would not spend so much money buying another computer.

I know a day has passed but I am sure there is a solution.

↧

Graphics card problem

October 13, 2017, 10:28 pm

≫ Next: Hp touch screen not working in windows 10

≪ Previous: Display or internal system

my laptop is envy m6

and affter i instaling my grapgic card driver and restarting my laptop i got a black screen then they wont open , i disabled my new graphic card driver and from safe mode the asked you for help for your information i got this driver from amd

amd catalyst

thanks

↧

Hp touch screen not working in windows 10

October 13, 2017, 11:56 pm

≫ Next: Graphics card issue

≪ Previous: Graphics card problem

Guys my touch screen is not working..

I went to device manager->human interface devices there it is not showing any touch screen options itx just showing these two options

1-HID-complaint wireless radio controls

2-HP wireless button driver

please help me

↧

Graphics card issue

October 14, 2017, 1:52 am

≫ Next: HP envy all-in-one touchscreen problems

≪ Previous: Hp touch screen not working in windows 10

Hi, i need assistance with my pavilion dm4. The dedicated ATI graphics card is burned so i am currently using the intel graphics accelerator. Right now, however, i reset my notebook to it's factory setting default which totally reformated the HD and reinstalled the operating system in its recovery software. My dilema now is, the default gpu that the notebook is loading in is the dedicated ATI gpu. Since it is burned, the installation does not complete its process for the notebook restarts for no display appears. I tried the safe mode but still it does not complete its installation. Is there a way to switch the gpu to the Intel on before start up. BIOS of the notebook does not have the option either. Please help.

↧

HP envy all-in-one touchscreen problems

October 14, 2017, 5:14 am

≫ Next: HP Envy 13-ab057na touch screen issue

≪ Previous: Graphics card issue

I purchased my HP envy all-in-one touchscreen desktop March 2016, it started acting up a couple of months ago, the touch screen was identified as the culprit causing the mouse and keyboard to not function. I was able to manually turn off the touch screen and it worked properly. Each time the system is powered down the touchscreen restarts and the problem resumes rendering the keyboard and mouse in operable. The tech-support people Best Buy where I purchased the machine indicated the only fix would be to replace the entire screen is it more than likely is a hardware issue. They also indicated it would likely be very costly, projected around $700. Are there any other fixes to my issue? And If not,will HP stand behind this machine ?Thank you in advance for your assistance.

↧

HP Envy 13-ab057na touch screen issue

October 14, 2017, 3:22 am

≫ Next: Intel graphic HD 3000 of Hp 4530s in Windows 10 Creator 64 bit

≪ Previous: HP envy all-in-one touchscreen problems

I have an issue where the screen registers touches when there aren't any! It seems to be in a specific segment of the screen area, the false touches can appear vertically anywhere in the affected segment (towards the right-hand side of the screen).

Seems like a defective touch panel to me, does anyone else have experience of this or an opinion?

Thanks.

↧

Intel graphic HD 3000 of Hp 4530s in Windows 10 Creator 64 bit

October 14, 2017, 6:16 am

≫ Next: Face recognition not working

≪ Previous: HP Envy 13-ab057na touch screen issue

I am using a HP 4530s with Intel HD 3000, accompanied the Core i3 - 2350M CPU. It had been running rather smoothly, even after the upgrades from Win 7 to Win 8, then to Win 10. But about 2 weeks ago, it updated to Win 10 Creator, and my problem appears. This newer Windows is not compatible with Intel HD 3000 driver, not from Intel website, HP website, or from Windows 10's auto-update feature (I have downloaded the newest versions from each website). Try to install any of those will result in black or grey screen. So now I am stuck with 1024x768 resolution from the Window Basic Adapter Driver, while the native resolution is 1366x768. As a result, reading/writing is now a taxing issue, and watching is impractical. The last resort is to reset back to Windows 7, but really I dont want to do that, with the data wiping and then the security vulnerability. Is there any solution? I am thinking about rolling back to Windows 10 pre-Creator, but unsure how to do that.

↧

Face recognition not working

October 14, 2017, 8:27 am

≫ Next: HP Probook 645 G2 turns red after playing game a wile and then buzz sounds starts and then reboot??

≪ Previous: Intel graphic HD 3000 of Hp 4530s in Windows 10 Creator 64 bit

My face recognition stop working. The set up works fine but when I try to log in my computer again it shows a small window for the pin number. I have set up the face recognition several times but logging in the computer still does not work, it keeps asking me for a password or pin number. How can I fix this? Thank you.

↧