I get an error and my touch won't work.
↧
↧
hp envy 17 upgraded to windows 10
Ok had this laptop for awhile, had windows 7 on it before i decided to upgrade to windows 10.
I cant change the screen brightness now, the option is there to adjust it but nothing works. Both the hot keys and the pop up are there but neither of them work. Even the on screen adjustment moves but nothing changes the brightness of the screen. Ive tried to disable the adaptive display and ive even unistalled both display drivers and reinstalled them. Used hp and microsofts updators and still nothing.
Any ideas would be appreciated.
↧
AMD error AMD Radeon HD 6300m driver / Catalyst software? Need my DUAL MONITORS TO WORK
I realize this is an older laptop and so the graphics card/s are also older. I just upgraded to Windows 10 from Windows 7. In 7, I could use dual monitors with the second being an extension of the other. After upgrading to Windows 10, the second monitor, a desktop flat screen monitor is not detected. Everything that is on the laptop screen is exact on the second screen. It workd in Windows 7 just fine.
Graphics = AMD Radeon HD 6300m series and
ATI Mobility Radeon HD 4200 series
The 6300m had the little yellow triangle on it after I was through upgrading. I went to you, Windows Update and then AMD seeking help to get the dual screen setup correctly with the secondary as extended of the laptop screen. So far, nothing I have done has made it work correctly. I get an error message that says something like.... "No AMD graphics driver is installed or the AMD driver is not functioning properly. Please install the appropriate driver for your AMD hardware.?
I have tried several times using "detect" at the AMD site. I wonder if there is some kind of workaround or an appropriate driver that would work.
Thanks,
Sherry
↧
HP Envy TS 17 Notebook Touchscreen Functionality in Windows 10
When in Windows 8.1 the touchscreen worked without issue. When Windows 10 was initially installed the touchscreen was fully functional (scrolling, selection, magnification, scrolling from the right to open the action center, etc.).
Following the first major update to Windows 10 (KB3081424), which was installed on 8/6/15, the touchscreen functionality is restriced in many Windows functions/Microsoft Programs. For instance, the action center can no longer be opened by swiping from the right side of the screen, the material on the screen can no longer be scrolled using touch (the touchpad still works for this function) and the magnifier (pinch/expand) function does not work on the touchscreen (it still works on the touchpad). In Adobe Acrobat DC, when enabled in that program, the touchscreen is functional for scrolling through a document. In the various Microsoft programs (e.g. Outlook; Edge browser, etc.) the touchscreen functions only to locate the cursor/select text, but that is all - except that the touchscreen functionality to click on something to select it is fully functional in all situations.
On the day after the installation of Windows 10 update KB3081424 an update was installed to the touchscreen controller (eGalaxy USB Touchscreen Controller update A80F) - but this has had no impact on touchscreen functionality. Since then the next major Windows 10 update (KB3081436) was installed on 8/11 with no impact.
How do i restore full touchscreen functionality.
↧
Laptop shutting off & overheating issues
Hello,
my product name is Pavilion g6 Notebook PC& its Operating System is Microsoft Windows 7(64-bit). Whenever I turn off this laptop, it doesn't boot up normally when I turn it back on, instead, I have to place a cloth over the vents and heat up the system. Process takes about 25-30 minutes before I can try to reboot it successfully. FYI: Saw this in a video on YouTube. But other than that problem, Shockwave has been causing my laptop to just shut off out of the blue! I use Firefox but my relative says they don't have this problem with Google Chrome, which it has shut off on them before. On top of all this, I was informed that this all might've been (including the heating situation) due to the laptop's adaptor overheating. When it shut off on me recently, I instantly checked the temperature of the adaptor near me and the vents on the laptop, neither were extremely hot. So what's going on, aside from the heat issue, is Shockwave corrupted within Firefox and/or Chrome and is causing harm to my poor laptop?
↧
↧
Intel(R) HD Graphics 4000 version 10.18.10.4252 not working on windows 10
I'm using an extra monitor (HDMI port) and stop working with the Intel(R) HD Graphics 4000 version 10.18.10.4252 version. On windows 8.1 I go back to Intel(R) HD Graphics 4000 version 10.18.10.3304 version and work fine.
I can't do this on windows 10 because it sais is not compatible.
I have a HP notebook
Product name:HP ENVY TS 15 Notebook PC
Product number:E0K02UA#ABA
Processor name:Intel(R) Core(TM) i7-3920XM CPU @ 2.90GHz
Any idea?
↧
Touch Screen not detected
Upgraded to Windows 10 on 07/29 since then the touch scrren on my HP Envy m6 is not active or detected. Device manager shows
Under Mice and Other Pointing Devices
USB Touch Screen Controller (A103)
Under Human Interface Device
No HID-compiant Touch Screen device shows
This I beleive is the problem.
Scan for new harware does not find any new hardware.
I checked HP support for drivers and did not find anything. I did delete an EGalaxy driver as another support site indicated it was bad. Any help is appreciated.
↧
Problem updating radeon hd 6490m
Hello, about 6 years ago i bought notebook hp pavilion dv7 6090el with both video cards intel hd 3000 and radeon hd 6490m. this last one should have a good performance. now after 6 years i can t run none of the newest games neither at minimum setting and i think because i never updated the driver. how i can do it in a right way? let me know soon please. thx in advance. W ould be awesome if you could provide some links explaining me what to do. Thx.
↧
dv7 6b32us black screen
Im having the famous black screen problem. I can shine a flash light in to the screen and see everything thats supposed to be there. It works fine with an external monitor so Im sure it is an inverter issue. The entertainment pc is different and I cannot figure out how to change the inverter board. Where is it?
↧
↧
Monitor brightness issue
i can't change brightness of disply.
didnt found any option in the system.
some one can advice???
↧
Graphics card change
hi there, ive had my hp 15-j113ea for over a year and its been great so far.
the only question i have, for this particualr model is, can i upgrade the graphics card?
not so long after i bought the laptop, the newer model with Nvidia 840m (mine is 740M) was released, and i want to still continue running al my games at max/high settings. with the increase of graphic output by games, i dont really want to completely buy a new laptop, but want to make sure i still have a graphics card that runs high performance games.
thanks
↧
USB-to-DVI monitor cuts out DisplayPort monitor on EliteBook 8560w
I just purchased a StarTech USB3-to-DVI adapter (USB32DVIPRO) from Amazon and received it Friday. Experiencing a slight issue that I hope someone can help with.
Computer - HP EliteBook 8560w ( AMD FirePro M5950) w/ Advanced Docking Station running Windows 10
Screen Setup (prior to adapter): Built-in + 2 DisplayPort + 1 VGA = 4 total, all worked)
Desired Screen Setup: Built-in + 2 DisplayPort + 1 VGA + 1 DVI (via USB) = 5 total, only 4 will work at a time (see below)
When I plug in the USB-2-DVI, that monitor turns on, but one of my DisplayPort monitors turns off. When I unplug the USB-2-DVI, the DisplayPort monitor turns back on.
Has anyone else tried this configuration before? I'm wondering if it is a limitation of the laptop/dock, or the adapter itself. I found this forum posting, and am thinking this may be what I am running into: http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-ZBook/EliteBook-8560w-advanced-docking-station-using-more-than-2/td-p/5354281?notmigrated#.Vc4tzeSFOhc
↧
HP- dv4 Notebook
I have a HP dv4 laptop that I have been using for a few years. I had replaced the battery a couple of years ago and all worked fine, except the battery that made a loud noise out of the box, when purchased at Best Buy.
Recently, there is a persistent issue with the screen. It blanks out (black) randomly and displays again after a while. This can happen from a cold boot or after a few hours of activity. I took it to a local computer store and the technician advised it can be due to multiple reasons.
a) Heat due to blocked vents - Air dusted the vents from outside. So this too is ruled out.
b) Video card is faulty - Not sure if this is the cause. If yes how to detect?
c) Motherboard - The HDMI and VGA works even when the screen is blank. So this is ruled out.
I 'm not sure on the advise as I believe it is a software issue rather than a hardware as the screen can randomly disappear or appear on boot / from stanby or period of activity.
What is the probably cause?
↧
↧
Video driver for AMD Radeon HD 7340 Graphics
I have recently updated my HP Pavilion g6-2361eo Notebook PC from Windows 8.1 to Windows 10 - there were no warnings about hardware incompability.
But now I cannot watch many video formats (mp4, flv and others), or I can watch a video once and thereafter only hear the sound from the video but not see the video untill I reboot.
My system has a AMD Radeon HD 7340 Graphics card, and the latest AMD Catalyst15.7.1 update cannot install an updated driver for the graphics card - not surprising since the card is not listed in the drivers .inf file.
So I am stuck with a faulty driver version 15.200.1045.1 installed by Windows 10 where the latest driver should be 15.200.1062.1004.
First of all I find it highly objectionable that Microsoft lets Windows 10 install without proper drivers!
Secondly is there any chance that there will ever be a fully functioning Windows 10 driver for AMD Radeon HD 7340 Graphics?
Third - If I let Windows 10 reinstall my old windows 8.1 in order for me to wait for a proper driver, wil I then be entitled to the free Windows 10 upgrade later?
↧
dv6 1030 us help
hello i have a question i had bought my dv6 1030 us few years back 2 or 3 or so any how it had invidia drivers in stall yet the main gpu is intell are the invidia drivers needed be cause ive tryed to reinatall them recently downloading them from hp site n i get fatal error n i dont see a invidia in my display adaptor can some one let me know if they r needed and where to find old version of the geeforce 9200 gs drivers bc i dont see them on the invidia site the installer from hp ses im running a 32 bit version on a 64bit os n then a second message ses im not running windows os pls help thanks
↧
broken screen
Hi, i sat and my detachable laptop screen and broke it, i can still use it via a HDMI cable on my t.v and i can even scroll and use all the functions of the touch screen feature, naturally i want to buy a replacement, dont know how or where can i get one, am on west palm beach area..... its kinda urgent because its my only work tool, thank you very much,
also i dont know if it is necesary to buy the whole detachable creen because like i said the touch screen feature works perfect.. plz help!
↧
Any word on when windows 10 display drivers will be available?
Are they already available for some models? I went ahead and installed the windows 10 update because I noticed a "windows 10" option was now present in the drivers and support section of HP website.
Well after windows 10 installed, I went there to look for drivers, and all it says was to check windows update....how lame. Now I wish I hadnt upgraded to windows 10
↧
↧
SCREEN GOES BLACK DURING VIDEO PLAYBACK
I am haaving trouble when watching streaming video the screen goes blank less than 5 minutes into programming. I checked to see if there was some sort of power saving setting that was making this happen but there is nothing that I can find that would lead me to believe that that is the problem at this point. Any help would be greatly appreciated.
↧
Convertible display features lost with Windows 10
Since upgrading to Windows 10 from 8, the "convertible" features of my x360 (the whole reason I bought this notebook) no longer work. When I open it to "tent mode" for example, the screen does not flip upside down. When I turn it on its side, the screen does not reorient 90 degrees.
I have tried fiddling with the Windows 10 feature of "tablet mode" -- turning it off, turning it on, playing with the various options of whether I want Windows to automatically detect and adjust the mode, etc. Nothing gets it right. With the automatic detection on, when I flip to tent, it does switch to "tablet mode," yet everything remains oriented the same (meaning it is now upside down).
Anyone else have this issue? Any fixes out there? I have tried downloading new BIOS, event utility, etc... as instructed by HP Support Assistant, so everything is updated I think. Yet still no dice.
Would love to hear any suggestions!
Tim
↧
Black screen during start up
When I was starting computer, the screen went black
Removed battery and unplugged power. See started. Still black. Attached external monitor and press f4 still black.
Removed battery and powered with cord only. Still black.
Hear computer working normally but screen is black.
Need help to resolve the issue.
Removed battery and unplugged power. See started. Still black. Attached external monitor and press f4 still black.
Removed battery and powered with cord only. Still black.
Hear computer working normally but screen is black.
Need help to resolve the issue.
↧
More Pages to Explore .....
