As you can see the buttons in the left midle menu (one button is green, they are documentation, developer, etc) are wrong... I have same problem in other programs or even in Browsers... Display in general is not correct:
Wrong way of render items inside programs (like in Anaconda Navigator Python)
↧
↧
HP Spectre x360 13.3 4k screen issues
I just bought a HP SPECTRE 13.3" 4k version about couple of days ago, and I realize that the screen sometimes flicker or goes to black for no apparent reason. And at times when I'm using Thunderbird mail and google chrome, the lag is a unbearable, takes a few seconds for the mouse to go to the destination I wanted it to go.
Is this a hardware or a software problems?
Please help!
↧
Z5000 Bluetooth mouse has stopped working
I purchased a Z5000 bluetooth mouse 2 days ago. I put in the battery provided with the packaging, turned it on, installed the driver, got my HP ProBook 6470b to recognise the device and away I went. Everything worked perfectly until this evening, when my mouse suddenly stopped working. I have;
- replaced the battery
- turned the mouse off and on several times
- clicked the 'Connect' button on the mouse several times (the blue light flashes)
- checked that the mouse is still recognised by my computer (it is)
- run Troubleshooting on my computer (says everything should be fine
2 days seems like a pretty short amount of time to get good use out of a $50 mouse ... what am I missing?
↧
HDMI upon startup?
I have a HP laptop i would like to project on my HDMI TV usually but i have to mess around with the FN + F1~F12 everytime i turn it off, i'd like to know if there is a way to save the FN settings or make it not needed? simply put can i make this laptop project on my TV without having to mess with FN + F1~F12 evertime i turn it on? (if it means anything i also have a 2nd operating system i don't use which is WIndows 7 and windows 8.1 hasn't been activated yet)
↧
Wrong way of render items inside programs (like in Anaconda Navigator Python)
As you can see the buttons in the left midle menu (one button is green, they are documentation, developer, etc) are wrong... I have same problem in other programs or even in Browsers... Display in general is not correct:
↧
↧
Unable to upgrade Graphics Driver
I am unable to upgrade my grapichics driver with the following update:
After downlaoding and going throught the set up process I keep running into this error message:
Any idea as to why I am experiencing this?
↧
HP Pavilion x360 - 13-s150sa
hi
whats the small controller board thats connected to the digitizer and any idea where i can get 1
↧
Touchscreen not working after Windows 10 update
Hi, I have an HP Spectre XT TouchSmart Ultrabook 15-4010nr. Some time ago I updated my computer from Windows 8.1 to Windows 10, after that my touchscreen stopped working. It never bothered me until now. I tried going into the Device Manager and uninstalling the driver but the computer does not detect that there is a touchscreen.
↧
Connect HP Spectre x360 to Dual HP 21kd monitors
I would like to connect my HP laptop to dual monitors. I have the following ports:
On HP Spectre x360:
1 HDMI port
1 Mini DisplayPort
3 USD 3.0 ports
On each HP 21kd monitor:
1 VGA port
1 DVI-D port
My question is: what is the cleanest, fastest/recommended way to hook up to both? I have a number of options--for instance, MiniDisplay to VGA, HDMI to VGA, MiniDisplay to DVI, etc.
I am not concerned about whether audio is transmitted or not. Ideally, I would like to keep as many USB ports open as possible.
Thanks,
Brad
↧
↧
Any touchscreen pens that are compatible with the HP Pavillion 23 All-In-One?
I need help finding a good touchscreen pen for my computer. Not sure if this is the right board, but I'm asking here anyways.
↧
Re: How do I remove "welcome to your new HP laptop, you're all set" screen
I followed instructions: Settings > System > Apps & Features > located HP Welcome Screen left-clicked and clicked Uninstall. No message after that. Tried restarting system but HP Welcome screen came back again. Very annoying. How do I get rid of it?
↧
HID Touch Screen does not work
I tired to install a driver for a stylus to work on my touchscreen. After I installed the driver the touchscreen does not work, either with the stylus or fingers. Did a re-install for Winsows 10 and no luck. Re-installed all HP drivers and no luck.
Device manager does not show the HID touchscreen. All Windows updates are installed.
↧
Touch screen stops responding after sometime of use - HP Pavilion x360 m3
I have recently purchase HP Pavilion x360 M3 Convertable 13 inch.
It is a touch screen laptop running windows 10 64 bits.
two days ago while i was working on the laptop I suddenly experienced ghost clicks on the laptop screen. It appeared as if someone is ramdomly tapping on the screen along the left edge of the screen. As a result various icons were were getting activated and the cursor would jump.
I reset the laptop through system recovery.
Now i am not getting the ghost clicks but now initially after the boot up the laptop touch screen works fine. but after a while of use the touch starts to get laggy and finally it completly stops responding.
Can any one help me what might be the issue and how to resolve it.
(unfortunatly i am at a region where there is no HP support center, neither physically nor online)
Thanks
↧
↧
Hdmi lead.
I no its a Frequently asked question but no one has actualy gave a definative answere just stupid unplug this and swap leads that. my laptop has done a update last night before bed, I turn my laptop on dismorning now it wont detect my hdmi lead. ive got 3 cables none of them work but all 3 works in my xbox one so i no it aint the cables, i cant find anything todo in the settings with hdmi or output connections when the cables plugged in. Ive searched all over the internet for a solution but every solution everyone has posted doesnt work. its gettin realy frustrating specialy when u pay alot of money for the laptop and it wont work.
(removed content) serial Number
Z3D15EA#ABU Product number.
please get bak soon
↧
After upgrading to 8.1 once screen light goes off it re starts
After i upgrade to windows 8.1 once the light goes off it restarts
↧
HP Z27s
I have HP z27s at home and use it with an Mac Pro Mid 2012. It works fine. I just wonder why the buttons to the right don´t have any marks? I have HP Elite Display E231 at work and that has the buttons marked with menu-symbole, + and - and OK. Is it bacause there is another menu system in Z27s?
With regards
Pär Nordqvist, Sweden
↧
Searching for Videocontroller hp mini 110 3610eg
Hi,
since a few days I own a hp mini 110 3610eg on which I installed windows 7 entreprise 64bit.
After the installation the videocontroller lost.
These are the numbers I found:
PCI\VEN_8086&DEV_A012&SUBSYS_1584103C&REV_00
PCI\VEN_8086&DEV_A012&SUBSYS_1584103C
PCI\VEN_8086&DEV_A012&CC_038000
PCI\VEN_8086&DEV_A012&CC_0380
Could someone please give me a link to download the correct driver?
Thanks a lot, best regards.
↧
↧
AMD GPU on Zbook 15u not being used with Windows 10
Dear HP,
I have Zbook 15u G3 with Windows 10 pro 64-bit. All the drivers are up to date (AMD video driver 16.40.2902 Rev.A). When I run microsoft directx diagnostic tool, it keeps tell me I'm using Intel GPU. How can I switch or force the laptop using AMD GPU? THX
↧
Hp 15 n002so Hotkey not working or wont wake up from hibernation - depends on driver
Hi, i just install win 8.1 and i have trouble. First i install the newest driver from HP site, my f2 + f3 (brithness) working perfectly, but when i go to sleep mode (close lcd) or click "sleep" laptop kind of go to sleep, only screen goes black and nothing i can do (powet button is light up) i cannot wake up or nothing, only long press power button shutdown my laptop.
Than i install OS again and just make only windows update and again the same problem. So i uninstall manually intel hd graphics driver, then reboot and in device menager ive have radeon 8600m and Microsoft video graphic card, than the f2 + f3 dont working corectly, but sleep mode worked just fine.
Than ive try install intel autodetect tool do download latest intel hd drivers, this tool dowloaded drivers but cannot instal... Something my video doenst compatibile. Please help someone
Specs intel i5-4200U + AMD HD 8600m Sorry for my English 
↧
My laptop hp pavilion dv6700 switches on, but there is no display.
The repairer has charged me heavily thrice. Each time has made me replace some or the other thing in the laptop. The problem persisted. This time he says NVDIA display chip is faulty. How true is it? He says this particular chip has two parts, external display and internal display. As per him, external display portion of the chip is functional and internal display portion is faulty (inside the chip). Hence there is no display on the screen !! Shall i get it replaced? I have already spent a lot , but to no avail.
↧
More Pages to Explore .....
