When I run some CAD software on my laptop ,it crashes with error called "video TDR failure" or "video scheduler internal error". How to troubleshoot this issue.
Display adapter problem
↧
↧
graphic
I want this card graphic
↧
Touchscreen?
Is the HP 17-bs009ds TOUCHSCREEN?
↧
Costing of touch screen
My touchscreen is broken and the quatation i got is of 29000 Rs and price of my notebook is 34000 means excluding my panel remaing notepad cost is just 5000.
↧
The colors are very faded on my HP pavilion especially blue and gray
I have tried adjusting the colors to no avail. The blue is showing as a very light blue not the dark royal blue it should be for Microsoft. The gray wording is showing very faintly and is very hard to read.
I have looked for any updates on down loads but could not find any. When I plug the PC into a monitor the colors on the monitor are coming out closer to what I expect.
thank you for any assistance that can be provided.
↧
↧
spectre 360 hdmi to usb connection
I want to connect the HDMI port on my Spectre to a USB port that is on my Toshiba TV. I am trying to watch dvd's from my computer on the TV. Can you tell me the correct cables or any other items needed.
↧
LED panel problems - Black bar through screen
I have a approx 1.5 inch black bar in the middle of the scree running from top to bottom. Sometimes the bar displays distorted images (not just black). I have connected an external monitor and it displays correctly and I can use my Windows 10 normally. Does this mean I need a need LED panel or could it be something else (I was told that this unit does not use a display inverter - which I have seen cause this type of problem). I have disconnect the cable at the bottom of the LED panel and reconnected but not change. Any advice is appriciated!
↧
Dual external Monitors
How do I find out if my HP Spectre x360 Convertible 13 will support 2 external monitors. I have them both connected. One direclty from the HDMI output and one with a USB to HDMI adapter. I also tired using the mimi display port to HDMI. The computer sees all 3 (countin the one on the notebook). It will only let me choose to display on the notebook and 1 other monitor. I have the choice to extend diplay or mirror display. If I choose mirror, the 2 external monitors do not work together. I cannot drag items from one screen to the other. Will my computer not allow this?
↧
Broken Touch Screen Repair cost
Hello
Just finished with online support specialist for my notebook LCD replacement issue.
Rep informed me that repair cost on the touch LCD is 579.99 which it does not make any sense.
MSRP on this model is 499.99 and repair cost is higher than notebook itself.
Please if anyone can able to direct me with reasonable repair option or better answers.
Thanks
↧
↧
New Hp Pen pn: 1MR94AA#ABL and hp pavilion 360m3u101dx will not link
Hi!
I bought a new hp pen 1MR94AA#ABL and have not been able to link it to my computer, I have a hp pavilion 360 m3 u101dx. I have checked for updates, changed the batter in the pen, the pen does not even show up under devises. What am i doing wrong, did i get a faulty pen, or is it just not compatible with my laptop. Frustrated please help! Thank you.
↧
HP Webcam Not Displaying Image, even with light on
Hi there,
I am writing because my Webcam is not working. The imaging device installed on my device is the "HP Truevision HD".
Whenever I try to use my webcam, the led light for the camera turns on but no image appears. This occurs across all software that can access the webcam - YouCam, Skype etc.
For example, when trying to use YouCam, the led light for the camera turns on, but the YouCam logo continues to be displayed (as is shown here https://support.hp.com/nz-en/document/c01414839#AbT4). My Camera is already selected in the settings for the program. I have tried working through the troubleshooting steps for YouCam but nothing has changed.
I have tried working through the troubleshooting steps here to no avail.
All device drivers are up to date. My Windows updates are also all up to date. I have tried disabling and re-enabling the webcam. I have restarted my computer numerous times to no avail as well.
Any assistance as to what is preventing an image from displaying would be greatly appreciated.
↧
Hp Envy 360 wont stream video/netflix/hulu/youtube
Ever since I did all the recommended HP updates a few months ago my vidoes wont stream, like netflix, hulu, youtube, etc. Everything else works fine, but as soon as I try to play a video or stream Netflix my screen goes black after I push play. Please help fix this, this is too expensive of a laptop/notebook to not be able to stream video. The computer also tells me it cannot download or update the cyberlink power media player software and to try again later, I don't know if the two are related or not.
↧
Screen Project Driver
cannot get my screen to Project to a TV or monitor, using HDMI, ect. Says to Re-install driver or use a different Video card, cannot seem to figure out the problem, any assitance will be greatly appreciated.
↧
↧
Hp Envy ts m7 notebook has broken hinges
My hinges are both broken on each side of my screen and my warranty is long gone this kind of ticks me off because I dont handle my notebook rough and theres no reason for them to break. How much does HP vcharge to fix this its ridiculous I paid over $1000.00 for this notebook new and its falling apart. I cant close the notebook anymore.
↧
No display Probook 6560b
Hello everyone,
So my laptop stopped working recently for an unknown reason.
Tried to boot my laptop at work this morning and suddenly my screen didnt display anything.
I have no video signal at all.
The laptop goes on and off but no signal at all.
The fan also runs at high speed and makes alot of noise.
What can i do or try atleast?
Which cable should i check?
Thanks in advance!
↧
Laptop suddenly stopped giving signal to projection device
Hi, my laptop (HP Spectre x360 convertible) had no problems in connecting to projection devices, even with converter cables like VGA to HDMI.
Last week after a break during a presentation, when I turned the screen again on, there was no projection on the wall but only the error message "No signal detected". I let the projection device detect sources again. I tried to duplicate my screen via Windows P again. I turned off and on the projection device and computer. Everything useless. I bought a new coverter cable. Useless. Other PC's work with the projection devices w/o problem, only mine.
There's no other problem that I can see with my computer.
Help!
Thanks in advance.
↧
HP MT3 - HP EliteBook x360 1030 G2
the HP MT3 - HP EliteBook x360 1030 G2 we current are using the HP Elite USB-C Docking Station-Europe and we have intermittent issues where Main external monitor screen goes black. And the only way to get back is reboot the PC. Have changed all cables and the C dock. This is happening for the General Manager of all people.
↧
↧
Touchscreen broken
Hello,
The touchscreen is broken.
There is a crack from top to bottom.
But now i am looking for a good company in the Netherlands to have it repaired.
And not by making a call to HP for 40 euro.
And yes it has touchscreen.
Oh and the screen it self is still working with mouse and keyboard.
The keyboard is a bad product by the way it is the 2 one and i noticed they dont sel that laptop anymore.
I understand why.
It is a detachble keyboard with a flexible folding point wher also the wires are going trough.
There you have a weak point and when the wires are broken it wont charge the keyboard anymore.
We use a universal bluethooth keyboard now because of the only 1 year waranty from hp.
But back to the question i need a good adress in the Netherlands to have it repaired.
↧
Second monitor
I recently purchased a Diamond DisplayLink docking station for my laptop. Everything seems to be working, but I have an issue that I dont know how to resolve. I want to be able to close my laptop lid and be able to work off the secondary monitor. Is this possible? If so, can someplease give me instructions on what to do. Thank you!
↧
Blank Screen
Every time my computer is shut down or is restarted from hibernation mode I get a blank display sceen. The laptop is running but the screen is black. I have updated the BIOS and downloaded the new Windows 10 update. I have to unplug the power, turn off the computer, then press the windows key and "v" in order to get the computer to reboot and the HP logo and display to start. Otherwise there is no display, no mouse cursor, etc. I am having to do this every time the computer is closed or restarted.
↧
